High and low temperature test chambers are large mechanical equipment that should be fixed in one place, and should not be moved from time to time unless necessary. Then, what are the matters needing attention when handling high and low temperature test chambers?
Before going forward, consider the size of elevators, aisles, corridors, and doors before moving high and low temperature test chambers, and whether they can pass smoothly and reach the designated location.
Second, consider the floor where the high and low temperature test chambers are placed. If placed on the first floor, the movable wheel at the bottom of the test box itself can be moved. If it is placed on the upper floor, it is necessary to consider whether there is space in the corridor and the corner.
Third, the high and low temperature test chamber has a refrigeration system, and the inclination angle cannot be greater than 15° to prevent leakage of refrigerant and affect refrigeration performance.
Fourth, when the high and low temperature test chamber volume is greater than 500 liters, manual handling is not recommended. Because the weight and volume of the equipment is too large, it may cause serious safety hazards between personnel and machines. At this time, it is necessary to consider whether the window can be knocked off and used to lift the crane or replace the place.
During the handling of high and low temperature test chambers, care should be taken to avoid impact, bumping, and scratching. After handling, the equipment should not be used immediately. It should be static for 2-3 days before starting operation.
Portable Pure Sofa Cushion,Durable Pure Sofa Cushion,Anti-Static Seating Cushion,Customized Seating Cushion
SHAOXING CITY JINYAO TEXTILES CO.,LTD , https://www.jinyaotextile.com